Home > Products > Bright Spot - High Spot Indicator

Bright Spot - High Spot Indicator

Company : George Taub Products & Fusion Co Inc

UMDC Code : 107489

Bright Spot is a quick drying white liquid that creates a thin 7 micron film. It provides an excellent contrast to and aids articulating paper to mark surfaces that paper alone will not readily mark such as highly polished porcelain and metal. Because only a minimum amount of pressure is needed to mark the film, premature marks are more readily apparent. Use it also for checking high spots inside crowns, for interproximal contacts, on inside clasps. The film will easily scratch or rub off indicating the high spot. Bright Spot II red indicating liquid stays wet as a thin film of around 7 microns. It is applied to the opposing or adjacent surface and transfers a mark at the lightest touch or contact. It is applied on the opposing side or arch for diagnostic evaluation and equilibration on enamel or models. Use it on the inside of crowns to detect internal discrepancies. Use it for checking crowns or for seating partial denture framework. Bright Spot II is best when applied to a dry surface. It will mark, even if the surface is wet from saliva or water spray.

Product URL : http://www.taubdental.com/index.cfm?Body=product&P

Last Updated : 03/16/2013

Please provide the following information and a representative of George Taub Products & Fusion Co Inc will contact you to assist with any questions you might have.

Medical Product Guide Optometric Management Product Guide